skyVac® A37 - Health & Safety Vacuuming System

Atex Internal Toolkit

Click images above to enlarge

Atex A37

Click images above to enlarge

skyVac® A37

Suitable for: Both M-class dust and ATEX Zone 22 environments

Key Features:

  • Build-in FlowSensor and acoustic warning signal monitors air speed
  • Brushless long life EC motors for ignition source-free performance
  • Washable PET fleece filter with minimum 99.9% filtration efficiency
  • Approved for cleaning and dust extraction in ATEX Zone 22 environments with explosive dust
  • Push&Clean filter cleaning system to increase efficiency and reduce downtime
  • M-class hazardous dust approval
  • The only independently ATEX certified high level cleaning pole system compatible with all ATEX certified vacuums.
  • Spinaclean are proud to be the only authorized accessory supplier to the 3 largest manufacturers of ATEX vacuums worldwide.

Prices from: £3,280 (£3,936 inc-vat)

+ Click Here for full specification

Vacuum specification:

  • Air flow Movement: 3200 Litres per minute (Maximum)
  • Motor wattage: 1400 max
  • Decibel level: 60
  • Container capacity: 37 Litres
  • Mains connection: 240 volt
  • Height: 75cm
  • Weight: 13kg
  • Power Cable Length: 7.5 metres

Included as Standard in each Antistatic Kit

  • Industrial vacuum (Nilfisk ATTIX 40 TYPE 22)
  • ATEX Certified carbon fibre poles 1.5 metres long - the lightest available at just 280 grams each
  • Carbon fibre 155 degree tool holder
  • Carbon fibre 65 degree tool holder
  • Carbon fibre straight hose cuff connecter
  • 4 metres of 38mm Antistatic flexi pick up hose
  • 3 x Assorted internal end tools
  • Antistatic pole and accessory carrying Holdall
  • Stainless steel bend tube (For low level Cleaning)
  • Anti-static rubber crevice tool (For low level Cleaning)

Choose the Height You Wish to Reach

  • 6 Metre Reach (20ft)
  • 9 Metre Reach (30ft)
  • 12 Metre Reach (40ft)

+ Click to read Risk Assessment details

Risk Assessment (ATEX)

If this vacuum cleaner is used for collecting flammable / explosive materials or within a zoned area classified under the ATEX 137 Directive 1999/92/EC then a risk assessment must be carried out by a competent person to verify the suitability of the application.

The risk assessment will be the responsibility of the customer / end user and should take into account but not be limited to the characteristics of the material being collected such as:

  1. Spark ignition sensitivity
  2. Hot surface ignition sensitivity (cloud)
  3. Hot surface ignition sensitivity (layer)
  4. Explosion severity
  5. Burning behaviour
  6. Thermal instability
  7. Chemical instability
  8. Static electricity generation
  9. Impact of collected material
  10. The ATEX certification code for the appliance being assessed. (See the rating plate on the machine).

Select your choice of pole length that re-calculates the price, click on the drop down menu below.

add to cart view cart